Title: Recommended software settings for 536 and Monumental Designer software
Abstract: Recommended software (Monumental Design, cutter driver, and cutter) settings for 536 rubber cutter.
Last update 3-6-9

Title: Using AutoCAD® with DirectCut Printer Driver
Abstract: When printing using AutoCAD® to the Allen DirectCut driver it is useful to create a pc3 file for the system printer to save the settings of the driver. This procedure walks through the process of creating the driver.
Last update 5-27-7

Title: Using AutoCAD® with Allen Printer Driver
Abstract: AutoCAD® Lite defaults to pen widths greater than 1 pixel wide. This causes the GDI (Graphic Display Interface) in Windows to send a graphic image to the printer driver instead of cosmetic lines. In order to use the Allen printer driver you must set the plotted pen width to 0.
Last update 12-18-2

Title: Long Path Problem with Monument CAD & Power CAD
Abstract: PowerCAD and MonumentCAD have trouble with extremely long paths. The cad program only output a small portion of the path to the printer driver. This TSB shows a work around.
Last update 9-15-4

Title: Plotting Drawings Larger Than Windows Maximum Page Size with Allen Printer Driver
Abstract: A tutorial using various cad systems to cut a drawing larger than the maximum paper size allowed by Windows. (PowerCad, CorelDraw, Adobe Illustrator, AutoCad 2002)
Last update 11-15-4

Title: Using Print on Template Material
Abstract: It is sometimes useful to be able to cut and draw on the same template within the same job. This is easily accomplished in the template maker as the AllenCAD already has the cuts in red and the text in green.
Last update 11-15-4

®AutoCAD is a registered trademark of AutoDesk