2-27-13 cutter driver build 2.14e (Cutter Driver)
1-31-13 TMC Axxis firmware A18 (Axxis)
1-30-13 updated bafo drivers for usb to serial (usb to serial )
1-30-13 cutter driver build 2.14d (Cutter Driver)
1-28-13 tmc i-TECH remote panel build A17 (i-TECH firmware, 2xx firmware )
1-27-13 mmc i-TECH remote panel build 14 (i-TECH firmware, 2xx firmware )
12-3-12 Centra HS tech build 27 (Centra HS)
9-13-12 cutter driver build 2.14c (Cutter Driver)
9-10-12 Centra HS tech support page (Centra HS)
7-23-12 cutter driver build 2.14b (Cutter Driver)
6-25-12 mmc i-TECH remote panel build 13e (i-TECH firmware, 2xx firmware )
6-5-12 Axxis build 13d (Axxis)
6-6-12 cutter driver build 2.14a (Cutter Driver)
5-1-12 cutter driver build 2.14 (Cutter Driver)
3-28-12 drawing on template (AllenCAD)
3-12-12 hs job Estimator
3-2-12 Remove links for axxis firmware from web site
1-24-12 Axxis SR build 13b firmware and remote panel
2-9-12 cutter driver 2.13b
1-5-12 build 13b axxis firmware
12-22-11 restart spooler to fix waiting for port
12-15-11 cutter driver build 2.13a
12-8-11 sand blast remote panel build 75e
11-28-11 Axxis Pot Upgrade
11-22-11 Encoder testing
10-25-11 ra-236 mark eye pro instructions
10-21-11 axxis finisher firmware 12-jc
10-18-11 Allencad scale
10-17-11 laser not firing testing
10-14-11 dfs belts tsb
10-5-11 centra 12-s firmware
9-28-11 axxis finisher 12-jb
9-20-11 mmc error codes
9-14-11 axxis printer base firmware 12-fb
9-14-11 Epson Steps to Prevent / Reduce Banding
9-14-11 Epson Tech Support Contacts
8-25-11 i-tech firmware 12-r5
8-24-11 Infeed accumulator adjustment
8-2-11 axxis web path steps
7-13-11 Firmware upgrade procedure
6-19-11 sand 8xx manual and post
6-13-11 epson b500 color profiles for wasatch
6-13-11 epson 4800 color profiles for wasatch
6-13-11 epson 4880 color profiles for wasatch
6-6-11 Centra and Axxis build 12-r3 (DFS, Axxis)
6-2-11 cutter driver 2.13
6-1-11 Axxis build 12-r3 (Axxis)
5-24-11 Beta DirectCut printer driver for windows xp, vista and 7 32/64 bit 2.12 (Cutter Driver)
5-24-11 mmc i-TECH remote panel build 12-r3 (i-TECH firmware, 2xx firmware )
5-11-11 open spooler
3-21-11 Engraver Firmware build 89f image processing improvement (Laser Engraver)
3-15-11 DirectCut printer driver for windows xp, vista and 7 32/64 bit 2.10c (Cutter Driver)
2-14-11 mmc i-TECH remote panel build 12-r (i-TECH firmware, 2xx firmware )
1-21-11 add suppplements and error code links (i-tech cutter user manuals)
1-17-11 DirectCut printer driver for windows xp, vista and 7 32/64 bit 2.10 (Cutter Driver)
1-17-11 updated bafo drivers for usb to serial (usb to serial )
12-9-10 AllenCAD version 7.2 build 13c(AllenCAD)
10-16-10 New TSB wasatch cost estimator (Axxis DFS)
9-29-10 DirectCut printer driver for windows xp, vista and 7 32/64 bit 2.09a (Cutter Driver)
9-29-10 Updated TSB usb to serial devices (usb to serial )
9-29-10 Axxis build 12-Ja (Axxis)
9-29-10 Centra and Axxis build 12-gb (DFS, Axxis)
9-29-10 Axxis printer base build 12-Fa (Axxis)
9-29-10 mmc i-TECH remote panel build 12-ha (i-TECH firmware, 2xx firmware )
9-28-10 Update i-TECH Users Manual (i-TECH users manual)
9-24-10 New computer requirements page (Cutter Driver)
9-20-10 update TSB Axxis Loading (Axxis)
8-31-10 update TSB Analog Accumulator Testing (Axxis)
8-31-10 Axxis build 12-J (Axxis)
8-18-10 New TSB Analog Accumulator Testing (Axxis)
8-18-10 Update Axxis Users Manual (Axxis)
8-11-10 mmc i-TECH remote panel build 12-h (i-TECH firmware, 2xx firmware )
8-3-10 New TSB cutting from EasyStone (cad software release notes)
8-3-10 Update i-TECH Users Manual (i-TECH users manual)
8-3-10 Update Centra Users Manual (Centra users manual)
7-24-10 DirectCut printer driver for xp, vista and windows 7 64 bit 2.09 (Cutter Driver)
6-25-10 New TSB:Y axis belt replacement procedure (DFS/Centra)
6-21-10 i-TECH remote panel build 64 (i-TECH firmware )
6-21-10 DirectCut printer driver for xp, vista and windows 7 64 bit 2.08h (Cutter Driver)
6-21-10 New TSB Using Ethernet Connection (Cutter Driver)
6-3-10 Update i-TECH Users Manual (i-TECH users manual)
6-3-10 Update Centra Users Manual (Centra users manual)
6-3-10 Update Axxis Users Manual (Axxis users manual)
6-1-10 Axxis build 12-g (Axxis)
5-18-10 usb driver repair tsb (Cutter Driver)
5-12-10 Centra and Axxis build 12-F (DFS, Axxis)
5-12-10 Axxis printer base build 12-F (Axxis)
5-11-10 mmc i-TECH remote panel build 12-F (i-TECH firmware, 2xx firmware )
5-11-10 Axxis finisher build 12-F (Axxis)
5-3-10 DirectCut printer driver for xp, vista and windows 7 64 bit 2.08g (Cutter Driver)
4-9-10 mmc i-TECH remote panel build 11U (i-TECH firmware, 2xx firmware )
4-8-10 AllenCAD version 7.2 build 13b(AllenCAD)
4-2-10 updated bafo drivers for usb to serial (usb to serial )
2-27-10 Axxis printer base build 11U (Axxis)
2-22-10 Axxis finisher build 11U (Axxis)
2-18-10 Centra and Axxis build 11T (DFS, Axxis)
2-18-10 mmc i-TECH remote panel build 11T (i-TECH firmware )
2-4-10 DirectCut printer driver for xp, vista and windows 7 64 bit 2.08e (Cutter Driver)
2-4-10 Centra and Axxis build 11P (DFS, Axxis)
2-4-10 mmc i-TECH remote panel build 11P (i-TECH firmware )
1-26-10 DirectCut printer driver for xp, vista and windows 7 64 bit 2.08d (Cutter Driver)
1-14-10 mmc i-TECH remote panel build 10 (i-TECH firmware )
1-14-10 Centra and Axxis build 10 (DFS, Axxis)
1-4-10 DirectCut printer driver for xp, vista and windows 7 64 bit 2.08c (Cutter Driver)
1-4-10 Using cross over cable with build 8 mmc software (Axxis, Template Maker, Traffic, Vinyl,
            Smartmark Cutter, DFS, rubber, Hot Tip, magnetic signs )
12-21-9 Split Axxis and DFS page. Post Axxis user manual, loading instructions, and color profiles (DFS, Axxis)
12-8-9 DirectCut printer driver for xp, vista and windows 7 64 bit 2.08b (Cutter Driver)
10-22-9 AllenCAD version 7.2 build 13a(AllenCAD)
10-22-9 Centra and Axxis build 8 (DFS)
10-22-9 mmc i-TECH remote panel build 8 (i-TECH firmware )
10-22-9 mmc cutter driver 2.07d released (Cutter Driver)
10-6-9 updated bafo drivers for usb to serial (usb to serial )
8-23-9 prosheet 1.01 850 firmware (Prosheet 850 firmware)
4-28-9 DFS build 63 (DFS)
4-28-9 i-TECH remote panel build 63 (i-TECH firmware )
3-11-9 new tsb for cochran's monumental designer software (Cad Software Notes / Cochran's)
2-2-9 printer driver version 2.06e for corelprint (Cutter Driver)
12-9-8 update tsb Recommended USB devices to include circuit city offering (usb)
11-14-8 template maker tutorial video Template Maker
11-12-8 Add color profiles for Epson 4880 printer for Wasatch rip (DFS)
10-24-8 AllenCAD version 7.2 build 13(AllenCAD)
5-10-8 printer driver version 2.06d for corelx4 (Cutter Driver)
5-1-8 printer driver version 2.06c (Cutter Driver)
4-24-8 AllenCAD version 7.2 build 10(AllenCAD)
4-24-8 Documentation for AllenCAD version 7.2 build 10(AllenCAD)
4-20-8 printer driver version 2.06b (Cutter Driver)
1-18-8 update tsb encoder testing (Template Maker, Traffic, Vinyl, Smartmark Cutter, Quicksand,
            DFS, rubber, Hot Tip, magnetic signs )
12-19-7 printer driver version 2.06a find edge (Cutter Driver)
12-17-7 DFS build 59 find edge (DFS)
12-17-7 i-TECH remote panel build 59 find edge (i-TECH firmware )
11-21-7 printer driver version 2.05a coreldraw 13 install (Cutter Driver)
11-16-7 DFS build 59 (DFS)
11-16-7 i-TECH remote panel build 59 (i-TECH firmware )
10-28-7 Update 9240 sdk version 1.03 (Recorders)
10-18-7 New TSB units of measure metric, mm, inch (Cutter Driver, AllenCAD)
10-4-7 600, 700, 900, 1000, 1100, D5000, map21s, & map21p users manuals. (Recorders)
10-2-7 Sand firmware build 75c vista improvment (Quicksand)
10-2-7 i-TECH remote panel build 58 vista improvement (i-TECH firmware )
10-2-7 Engraver Firmware build 89c vista improvement Laser Engraver)
10-2-7 DFS build 58b vista improvement (DFS)
10-2-7 24 button firmware 2.47b vista improvement (2xx firmware)
10-1-7 printer driver version 2.05 new sort, new coreldraw interface release (Cutter Driver)
9-27-7 update tsb Recommended USB devices to include mac (usb)
9-14-7 update tsb e56,e57,e58 errors (Template Maker, Traffic, Vinyl, Smartmark Cutter, Quicksand,
            DFS, rubber, Hot Tip, magnetic signs )
7-12-7 bafo usb to serial vista driver (usb)
7-2-7 printer driver version 2.04a illustratator cs3 release (Cutter Driver)
6-1-7 AllenCAD version 7.0 build 8(AllenCAD)
5-24-7 New TSB AutoCAD printing to DirectCut (Cad Software Notes / AutoCad)
4-29-7 AllenCAD Version 7.0 build 7 (AllenCAD)
4-11-7 i-TECH remote panel build 58 vista release (i-TECH firmware )
4-11-7 Update TSB Single button copy (Smartmark Cutter)
4-4-7 New tracking video Template Maker, Traffic,, Vinyl)
3-30-7 DFS build 58a vista release (DFS)
3-20-7 AllenCAD Version 7.0 build 6 vista release (AllenCAD)
3-20-7 printer driver version 2.04 vista release (Cutter Driver)
3-30-7 24 button firmware 2.47a vista release (2xx firmware)
3-20-7 Sand firmware build 75b vista release (Quicksand)
3-20-7 Engraver Firmware build 89b vista release Laser Engraver)
3-20-7 Update TSB Cutting with two forces ( Cad Software Notes / Illustrator)
3-19-7 New TSB loading instructions (ProSheet)
2-17-7 DFS build 58 (DFS)
2-9-7 AllenCAD Version 7.0 build 5 (AllenCAD)
2-7-7 Color Profiles for Epson 4800 printer for Wasatch rip (DFS)
11-20-6 New TSB Extending Arc to Intersect with wall (AllenCAD)
11-15-6 AllenCAD Version 7.0 build 4 (AllenCAD)
11-15-6 DFS build 57 (DFS)
11-15-6 i-TECH remote panel build 57 (i-TECH Firmware)
10-12-6 DFS build 56 (DFS)
9-21-6 New TSB: supported scan directions (SmartMark Sensor)
9-10-6 Update and Create Material Loading Instructions (most products)
9-10-6 DirectCut Printer Driver Version 2.03 (DirectCut)
9-8-6 AllenCad 7.0 build 3 (AllenCAD)
9-8-6 Stand Assembly Instructions (Hot Tip, magnetic signs, rubber, SmartMark,
            Template Maker, Traffic, Vinyl)
8-22-6 New TSB scaling problems with Template maker Template Maker
8-10-6 Minor change to users manual (DFS)
8-10-6 Minor change to users manual (hot tip, magnetic signs, rubber, SmartMark,
            Template Maker, Traffic, Vinyl)
8-7-6 New TSB Mandrel Motor Troubleshooting (DFS)
8-2-6 New TSB Service Loop Sensor Troubleshooting (DFS)
7-29-6 DFS build 50 SunX (DFS)
7-29-6 DFS build 55 (DFS)
7-29-6 i-TECH remote panel build 55 (i-TECH Firmware)
7-29-6 i-TECH remote panel build 50 SunX (i-TECH Firmware)
7-23-6 New TSB Single button copy (Smartmark Cutter)
7-23-6 New TSB Print on template material (AllenCAD)
7-23-6 New TSB Rubber Pen Plot (Rubber Cutter)
7-23-6 rebuild tech support web site index.  Use new logo. Organize by product
            rather than topic.
6-28-6 printer driver version 2.02 (Cutter Driver)
6-28-6 i-TECH build 49 SunX (i-TECH firmware)
6-28-6 DFS build 49 SunX (DFS)
6-28-6 DFS build 54 (DFS)
6-28-6 AllenCad 7.0 (AllenCAD)
6-5-6 Allen tile 1.11 (AllenCAD)
5-3-6 DFS remote panel build 53 (firmware)
4-28-6 New TSB printing from Omega (CadSoftware Notes / Gerber)
4-22-6 i-TECH remote panel build 52 (firmware)
4-22-6 New TSB built in smart mark sensor (smartmark)
4-21-6 24 button firmware 2.46 (firmware)
4-21-6 AllenTile version 1.10 (AllenCad)
4-21-6 printer driver version 2.01 (Cutter Driver)
4-19-6 cart assembly instructions (users manual)
4-5-6 DFS remote panel build 51 (firmware)
3-22-6 Sand firmware build 75 (firmware)
3-20-6 New tsb How to tile and print (AllenCAD)
3-20-6 Update VisualCADD TSB (CadSoftwareNotes)
3-20-6 Update i-TECH Users manual (Users Manual)
3-20-6 New tsb Manual Digitizing Contour Cut (Miscellaneous)
3-8-6 Sand firmware build 74b (firmware)
2-7-6 Engraver Firmware build 89 (firmware)
1-19-6 AllenTile build 1.09 (AllenCAD)
1-18-6 i-TECH remote panel build 3.51 (firmware)
1-17-6 Template maker suppliment update (users manual)
1-17-6 i-536 addendum new document (users manual)
1-17-6 i-536 adjustable parameters (users manual)
1-9-6 Update Cart Assembly Instructions (user manuals)
12-24-5 Build 2.00b cutter driver (Cutter driver)
12-14-5 Build 2.00a cutter driver (Cutter driver)
12-14-5 Build 50a i-tech remote panel (firmware)
12-14-5 Build 45a i-tech remote panel (firmware)
12-14-5 Build 48a dfs remote panel (firmware)
12-14-5 Build 74a Sand remote panel (firmware)
12-14-5 Build 2.44a allen remote panel (firmware)
12-05-5 Build 48 dfs remote panel (firmware)
11-27-5 AllenTile build 1.07 (AllenCAD)
11-26-5 i-TECH ver 3 build 50 (firmware)
11-22-5 Build 87a engraver firmware (firmware)
11-16-5 AllenTile build 1.06a (AllenCAD)
11-13-5 Update tutorial (AllenCAD)
11-13-5 AllenTile build 1.06 (AllenCAD)
11-10-5 New Tsb AllenCAD tutorial (AllenCAD)
11-9-5 AllenTile build 1.05 (AllenCAD)
11-7-5 new version of printer driver 1.22 (cutter driver)
11-1-5 9240 users manual and SDK (recorders)
10-25-5 Release version 1.03 AllenCAD tile program (AllenCAD)
10-19-5 New Product release AllenCAD tile (AllenCAD)
9-28-5 New TSB: Network sharing of printer driver (Cutter Driver)
9-28-5 New version of dfs firmware build 47 (firmware)
8-15-5 update TSB drawing a countertop (AllenCAD)
8-8-5 New Version of printer driver 1.20a (Cutter Driver)
8-4-5 New TSB Drawing a countertop with AllenCAD (AllenCAD)
8-4-5 New TSB Changing number of passes (Quicksand)
7-26-5 Build 87 engraver firmware (firmware)
7-25-5 AllenCAD update 6.0 build 2 (AllenCAD)
7-21-5 AllenCAD update 6.0 build 1 (AllenCAD)
7-21-5 patch for build 6.0 build 0 (AllenCAD)
6-29-5 AllenCAD 6.0 Build 0 (AllenCAD)
6-23-5 build 48 i-tech for dynamic interconnect (firmware)
6-17-5 update new tsb below (CadSoftwareNote / Gerber Omega)
6-15-5 New TSB using gerber omega with quicksand (CadSoftwareNotes)
6-8-5 build 46 dfs (firmware)
5-19-5 Build 45 for dfs and i-TECH cutters (firmware)
4-25-5 Mandatory Tuning change for all 536 rubber cutters (miscellaneous)
4-15-5 New TSB Cutting with two forces (Cad Software Notes / Illustrator)
3-31-5 Quicksand Firmware update build 74 (firmware)
3-25-5 Add assembly instructions for i-Tech users manual (users manual)
3-23-5 Version 2.44 of 315/24 button firmware (firmware)
3-23-5 New tsb for testing optical motor encoders (miscellaneous)
3-10-5 Update TemplateMaker Supplement (Users Manual)
3-4-5 New Version of printer driver (Cutter Driver)
2-11-5 New TSB: Plot Text from access (Cad Software Notes / CorelDraw)
2-9-5 Improve DFS 5 sensor firmware (firmware)
1-26-5 New rev 2.0 usb driver for bafo (usb)
1-19-5 315/230 users manual (Users Manual)
1-7-5 Update artwork and add photo of job printed in this format (SmartMark)
1-7-5 quicksand spare parts (quicksand)
1-7-5 New Product In Feed Tensioner (DFS)
1-7-5 New TSB:5 service loop sensors (DFS)
1-7-5 New TSB:Upgrade procedure from rev 1 to rev 3 scb (miscellaneous)
1-6-5 DFS firmware 3.42 for no pause on pen change (firmware)
12-30-4 Update TSB for Flexisign setup for flexi 7.5v5 (Cad Software Notes)
12-29-4 New TSB for preferrer contour cutting artwork generation (SmartMark)
11-16-4 QuickSand firmware build 73 (firmware)
11-15-4 New TSB for cutting drawings greater than 129 inches (Cutter Driver)
11-2-4 Three SmartMark Training Videos (SmartMark)
10-21-4 simplify intallation procedure for Print Driver 1.16 (Cutter Driver)
10-18-4 Improve sheet copy mode i-Tech build 40 (firmware)
10-14-4 Distributor written Documentation for ProSheet (ProSheet)
10-14-4 New TSB for flexisign setup (Cad Software Notes)
10-5-4 New tsb for testing motor encoders (miscellaneous)
10-1-4 add radio shack adaptor part # to usb (miscellaneous)
10-1-4 Improve intallation documentation Print Driver 1.15a (Cutter Driver)
9-30-4 New TSB using Flexisign with Print Driver (Cutter Driver&Notes)
9-29-4 general update for QuickSand firmware build 72 (firmware)
9-28-4 improve accuraccy of smart mark i-tech build 38 (firmware)
9-28-4 improve accuraccy of smart mark dfs build 38(firmware)
9-23-4 performance improvements dfs build 37 (firmware)
9-15-4 New TSB pinch wheels (miscellaneous)
9-15-4 New TSB Monument Cad bug (Cad Software Notes/AutoCad)
9-15-4 New TSB Using drive letter as output file directory (Cutter Driver)
9-14-4 international support 315/230, Smartmark build 2.42 (firmware)
9-13-4 Count up copies/international support DFS build 36 (firmware)
9-13-4 Count up copies/international support i-TECH build 36 (firmware)
9-9-4 Support selectable origin Illustrator/Corel ver 1.15 (Cutter Driver)
8-31-4 Redesign tech support web site to support cd version (all)
8-31-4 New document getting started with smartmark (smartmark)
8-26-4 Smart Mark Improvement DFS build 33 (firmware)
8-26-4 Smart Mark Improvement i-TECH build 33 (firmware)
8-26-4 Smart Mark Improvement 315 build 2.39 (firmware)
8-26-4 ProSheet firmware for high torque stepper driver (ProSheet)
8-25-4 ProSheet firmware for improved user Interface (ProSheet)
8-18-4 Automated program to update Gerber Omega Driver (miscellaneous)
8-16-4 New features in DirectCut printer driver (Cutter Driver)
8-13-4 add I/O Gear to non working usb to serial converters (miscellaneous)
8-10-4 add missed smartmark pause to 315 2.38 (firmware)
8-6-4 omega interface i-TECH 32 (firmware)
8-6-4 omega interface, x/y sensor size DFS 32 (firmware)
8-2-4 gerber omega interface for 315 build 2.37 (firmware)
7-20-4 change rubber anticipation range on 315/230 build 2.36 (firmware)
7-14-4 add keyspan to non working usb to serial converters (miscellaneous)
6-30-4 improve queuing on quicksand build 71 (firmware)
6-25-4 direct output from gerber omega with smartmark build 2.35 (firmware)
6-22-4 using smart mark on 315 with gerber omega and gspplot(smart mark)
6-18-4 updated smart mark setup (smart mark)
6-18-4 improve accruacy in 3 target contour cutting i-TECH build 31 (firmware)
6-18-4 sheet mode smart mark on i-TECH build 30 (firmware)
6-16-4 using smart mark on 315 with gerber omega and DirectCut(smart mark)
6-16-4 updated using gerber with direct cut printer driver (Cutter Driver)
6-11-4 support illustrator 11 with driver version 1.12a (Cutter Driver)
6-8-4 improve rubber cut quality Driver build 1.12 (cutter Driver)
5-27-4 quicksand users manual (user manuals)
5-22-4 prosheet users manual update (pro sheet)
5-20-4 engraver users manual (user manuals)
5-17-4 improve copy interface for ProSheet build 19 (prosheet)
5-6-4 improve ProSheet scan mode user interface prosheet build 17 (prosheet)
5-5-4 updated firmware upgrade document (miscellaneous)
5-4-4 i-TECH users manual (user manuals)
5-4-4 new using controlled depth knife holder (miscellaneous)
5-3-4 support corel draw 12 DirectCut version 1.11c (cutter driver)
5-3-4 updated tiling fix for gerber omega (miscellaneous)
4-22-4 hot tip instruction update (user manuals)
4-16-4 New skew adjust for dfs (user manuals)
4-13-4 support gerber omega paneling on 315/230 build 2.31 (firmware)
4-13-4 support gerber omega paneling on i-TECH build 27 (firmware)
4-13-4 support gerber omega paneling on dfs build 27 (firmware)
4-8-4 missed target pause on smartmark scan i-TECH build 25 (firmware)
4-8-4 missed target pause dfs build 25 (firmware)
4-5-4 Updated recommended usb (miscellaneous)
4-5-4 improve image quality engraver build 85 (firmware)
4-4-4 job logging, match colors to driver sand build 69 (firmware)
4-2-4 Updated e56,57,58 document (miscellaneous)
3-25-4 job logging on engraver build 38 (firmware)
3-11-4 update visual cadd setup (miscellaneous)
3-11-4 Setting Rubber Anticipation Factor (miscellaneous)
3-9-4 Updated DFS Users Manual (user manuals)
2-24-4 dfs table cutout appendix b (user manuals)
2-23-4 prosheet firmware load (pro sheet)
2-19-4 add higher power output on engraver build 82 (firmware)
2-18-4 dfs web path drawing (user manuals)